Accessing Nokia 3100b DC Input

Written By: Sterling Fuentes
  • Comments: 0
Accessing Nokia 3100b DC Input

Difficulty

Moderate

Steps

8

Time Required

25 - 45 minutes

Introduction

The DC input of the Nokia 3100b is where the cell phone's charger plugs in to. This guide shows you how to access the input and replace it if it has become damaged.

  1. SDmdONEZInqonUxw

    • Make sure your phone is turned off.

  2. W6DbfQUPlX2EDuRd

    • Press the button on the back of the phone and slide the back panel off.

    • Remove the battery by pulling it from the phone.

  3. U5eOiijHFBTelINk

    • Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.

  4. tZBHbpVoV1Jf5msM

    • Retrieve your SIM card.

  5. Md1kxWLxtUcGC2cU

    • Separate the front cover from the base.

  6. CwTRKD6eOf5vVmFU

    • Using a T6 Torx screwdriver, remove the screws from the screen assembly.

  7. TULgKC2rMZGPjsbQ

    • Separate the screen assembly from the base.

  8. NrofASUGjhNwpdTv
    NrofASUGjhNwpdTv
    qSOSFq1XtbOnuJOI
    TopmqOApBqlPdSnp

    • Use a pair of tweezers to remove the DC input from the base.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sterling Fuentes

Member since: 09/04/10

130 Reputation

0 comments