ATT Trimline 210M Back Cover Replacement

Written By: Juan Carrillo
  • Comments: 0
ATT Trimline 210M Back Cover Replacement

Difficulty

Easy

Steps

5

Time Required

5 minutes

Introduction

You will need to open up the phone in order to be able to detach the back cover and replace it. This repair might be needed if there is no ring coming from the phone.

  1. ckMWxUpZyiMq1Kne

    • Open up the phone with a metal spudger, sticking it in the bottom near the cord jack entry.

    • Be careful with the amount of force you use, or the plastic may crack.

  2. OTLv1Kc3pDp6AiAh

    • Pull up on the spudger while simultaneously pulling up the top shell of the phone.

  3. ERKlO5mXiFNADLIH

    • After unclipping the bottom half of the shell, pull upward from the position shown in the picture to detach the top half of the shell.

    • The cord connecting the speaker is short, and may detach if not done carefully.

  4. smTXrO2gkN5D6psI

    • You will have the motherboard and speaker exposed to you.

  5. T6fkEBgGq5bIQwTp

    • Detatch the black and red wire from the back cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Juan Carrillo

Member since: 10/02/16

406 Reputation

0 comments