2008 Honda Fit Inner Door Grip Replacement

Written By: Shambhavi Bhandari
  • Comments: 0
2008 Honda Fit Inner Door Grip Replacement

Difficulty

Easy

Steps

10

Time Required

5 - 15 minutes

Introduction

If you have a broken inner door grip on your 2008 Honda Fit, you can follow this guide to learn how to replace it.

One can experience discomfort when resting your arm or closing the door due to a broken inner door grip in your car. When replacing the door grip, use the correct part: the 07-08 Honda Fit Left Front Door Grip Cover NH167L (Graphite Black). Following the steps in this guide, you can easily install the new grip and restore full functionality to your car's door.

Before beginning this guide, place the car in park, power off the ignition, and engage the parking brake.

  1. ZGTH4nNDRZmLqWBg

    • Park the car on a level surface and engage the parking brake.

  2. SCbugLxRrRrN5o5t
    SCbugLxRrRrN5o5t
    XKjW3BM3aGwCqOxq

    • Open the door to access the interior door panel. Remove any dirt or tape from the door handle.

    • Remove the taped or broken inner door handle from the inner door panel of the car.

  3. Erx52qZcLEqFXbuJ
    Erx52qZcLEqFXbuJ
    YVGXqTSnbGbrKCgj
    dYLFhgZlLPvY1rCK

    • Retrieve the door grip and hook the door grip to the panel by the hook that is attached to the door panel.

  4. LcbiW1EnhFGyiLBT
    LcbiW1EnhFGyiLBT
    RVPxNUTOXcGjOLyt

    • Once the door grip is hooked to the door panel, the door grip will hang.

  5. UCBXyQC6xDt6Nilg
    UCBXyQC6xDt6Nilg
    CUYwA5VkekqfPkJv
    5WPNSebdrUFeyRAV

    • Starting with the right side, adjust the door grip to the claw attached to the door panel's right side.

    • Push the door grip gently.

  6. 1asi1RsUHe3qGohr
    1asi1RsUHe3qGohr
    bBNMMdnfAMmBd6AS
    l5uZMq2t1ZfUDAHT

    • Push the door grip to the claw attached to the door panel to lock the door grip so it attaches.

  7. j1CNgZlLR1JAFwDF
    j1CNgZlLR1JAFwDF
    RantEWdxFrceLaqy
    Vtp5xNK6sxXXZhSc

    • Insert the door grip into the center of the door panel that has two holes.

    • Make sure the centerpiece of the door grip is aligned with the center holes of the door panel for it to attach properly.

  8. 1JC6br4ENUNTIZB5
    1JC6br4ENUNTIZB5
    QKMHZEbCbgWCBICQ

    • Push the door grip to the claws on the top center of the door panel so it attaches.

  9. mIQBRfasvydZTRt3
    mIQBRfasvydZTRt3
    GNIgvBNjXMDfnu2c
    mkLBMNWe6vDLUZvg

    • Finally, press the left side of the door grip to the far left of the door panel to align with the door clips so that it holds the left side balancing the right.

  10. XJXUJTjmaTGA5UBe

    • Once each side of the door grip is attached to the door panel the inner door grip/handle is fixed.

Author

Shambhavi Bhandari

Member since: 20/04/23

208 Reputation

0 comments