Introduction

PRE-REQ

  1. YUVpxgnUTl5BCmjt
    YUVpxgnUTl5BCmjt
    Z6haxYAVoyUWAqQt
    • Open the trunk using your key in the trunk key slot or by using the lever under the driver's console.

  2. fVrtMONQfRJwECeS
    fVrtMONQfRJwECeS
    QWYZOXGCfU34GRGI
    umADZaAUxkZHpXOD
    • Remove the small plastic screw along the vertical edge of the trunk entrance using a flathead screwdriver.

    • Carefully peel back the trunk liner from around the edge of trunk opening by the light.

    • Locate the two panel tail light connectors located between the liner and the panel tail light assembly.

  3. JwUTamFkaGgxBZ6v
    JwUTamFkaGgxBZ6v
    M4EqBS5ScuUFoNZF
    HRJ5K36fuFlmeSis
    • Grab a light bulb socket and turn it counterclockwise until it can be removed from its hole.

    • Repeat this process for the other light bulb socket.

  4. l3fm5lH5YtQGZ5iA
    l3fm5lH5YtQGZ5iA
    VXS2Z6oOJ1kFJ5PT
    sqmFVXj6yBml6vg2
    • Locate the light bulb sockets in the trunk lid, located on the back side of the trunk tail lights.

    • Turn the light bulb sockets counterclockwise and remove them from their holes.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Miroslav Djuric

158199 Reputation

0 comments