Introduction

Use this guide to replace the front bumper on your '98 to '02 Honda Accord.

  1. Re4HVIwxuupvFyHh
    Re4HVIwxuupvFyHh
    EeOHENIiid3eTn2e
    • Locate and remove the bolts in the front of the wheel well on the either side of the car using a #1 Phillips screw driver or an 8 mm socket wrench.

    • Locate the bolts on the bottom of both corners of the bumper and remove them using an 8 mm socket wrench or box end wrench.

  2. OLMmpxVQvvf5nxKV
    OLMmpxVQvvf5nxKV
    KAEYpmSZLYS3KAcC
    QAVfJkm6XSLNaVAX
    • Locate the plastic push pins along the bottom of the bumper.

    • Use a small thin prying device, such as a flathead screwdriver, to pop the heads of the push pin up. Then remove the entire push pin assembly from their holes.

  3. Rjt1LXESuYe4qbIc
    Rjt1LXESuYe4qbIc
    YX2wtu2oZIhiJnaI
    WMwPtQXGDXLwwSaO
    • Remove the push pins on the two raised portions of the bumper next to the inside of the headlights.

    • There are four clips along the top of the bumper still holding it in place. Gently lift the bumper while pulling it away from the car to free the clips and remove the bumper.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Miroslav Djuric

158199 Reputation

2 comments

Awesome good directions and details

Eddie Jusino -

This article and other online queries, lead me to believe that the 98’-02’ Accord Coupe bumpers are interchangeable.  Anyone know for sure?  I ask cos’ I want to replace my 99’ bumpers with 02’ bumpers, front and back.

Kenneth Smith -