Admiral Oven and Range Error Codes
The error/fault or function codes listed here will vary from model to model. The codes on the model you are servicing might be different from what is listed. If this is the case, check the technical data sheet, the use and care guide, or the manufacturer’s website, or call the manufacturer for the description of the error/fault code you are experiencing.
Sometimes, by disconnecting the electricity to the product and waiting for two minutes and then turning on the electricity, this may reset the error/fault or function code, allowing you to reprogram and test the operation of the appliance.
For your safety and the safety of others, all testing and physical inspections of the product must be performed with the electricity turned off. On occasion, you will have to test a component with the electricity on. Extreme care must be taken to prevent electrical mishaps.
| Error Code | Description | Solution |
|---|---|---|
| F0 | One or more of the function keys are stuck. | Replace the touchpad assembly. If the touchpad is part of the clock, replace the clock. |
| F1 | Defective touchpad or clock. | Replace the touchpad and/or clock. |
| F2 | The oven temperature is too hot. | If there is a relay board, replace it. Replace oven sensor. Also, check the sensor wiring harness. |
| F3 or F4 | Oven sensor is open or shorted. | Check the sensor harness and connector between the oven control and the oven sensor. If the wiring checks out okay, replace the oven sensor. |
| F5 | Main PCB and hardware conflict. | Replace the clock |
| F7 | One or more of the function keys are stuck or shorted. | Replace the touchpad assembly. If the touchpad is part of the clock, replace the clock. |
| F8 | Analog/digital problem. | Replace the clock |
| F9 | Door latch problem | Check door latch assembly. |