Mode (most common element) of a list

Question

Write a snippet to calculate the mode (most common number) of a list of positive integers.

For example, the mode of

d = [4,3,1,0,6,1,6,4,4,0,3,1,7,7,3,4,1,1,2,8]

is 1, because it occurs the maximum of 5 times.

You may assume that the list is stored in a variable such as d and has a unique mode.

e.g.: Python, 49

max(((i,d.count(i))for i in set(d)), key=lambda x:x[1])

This is code-golf, so the shortest solution in bytes wins.

Answer 1

K5, 6 bytes

*>#:'=

The first (*) of the descending elements (>) of the count of each (#:') of the group (=). Step by step:

  i
4 3 1 0 6 1 6 4 4 0 3 1 7 7 3 4 1 1 2 8

  =i
4 3 1 0 6 7 2 8!(0 7 8 15
 1 10 14
 2 5 11 16 17
 3 9
 4 6
 12 13
 ,18
 ,19)

  #:'=i
4 3 1 0 6 7 2 8!4 3 5 2 2 2 1 1

  >#:'=i
1 4 3 7 6 0 8 2

  *>#:'=i
1

try it in your browser!

Answer 2

Python 2 - 18

max(d,key=d.count)

Since your python answer doesn't seem to print, I expect this is what you want.

Add 6 bytes for print normally.

Answer 3

Matlab/Octave, 7 5 bytes

Unsurprisingly there's a built-in function for finding modes. As an anonymous function:

@mode

This returns the most commonly occuring element in the input vector with ties going to the smaller value.

Saved 2 bytes thanks to Dennis!

Answer 4

Pyth - 6

eo/QNQ

Try it online.

Expects input on stdin like [4,3,1,0,6,1,6,4,4,0,3,1,7,7,3,4,1,1,2,8]. Ties are resolved by last occurrence because Python performs stable sorts.

Sorts the list by count the value in the list, then prints the last number of the list.

Q could be replaced with d if you initialized d to contain the value before e.g. =d[4 3 1 0 6 4 4 0 1 7 7 3 4 1 1 2 8)

Python-esque pseudo-code:

Q=eval(input());print(sorted(Q,key=Q.count)[-1])

Full Explanation:

            : Q=eval(input()) (implicit)
e           : ... [-1]
 o   Q      : orderby(lambda N: ...,Q)
  /QN       : count(Q,N)

Pyth's orderby runs exactly like Python's sorted with orderby's first argument being the key argument.

Answer 5

Mathematica, 25 bytes

Last@SortBy[d,d~Count~#&]

or

#&@@SortBy[d,-d~Count~#&]

As in the challenge, this expects the list to be stored in d.

or... 15 bytes

Of course, Mathematica wouldn't be Mathematica if it didn't have a built-in:

#&@@Commonest@d

Commonest returns a list of all most common elements (in case of a tie), and #&@@ is a golfed First@.

Answer 6

CJam, 11 10 bytes

A{A\-,}$0=

Assumes the array in a variable called A. This is basically sorting the array based on the occurrence of each number in the array and then picks the last element of the array.

Example usage

[1 2 3 4 4 2 6 6 6 6]:A;A{aA\/,}$W=

Output

6

1 byte saved thanks to Dennis!

Try it online here

Answer 7

Ruby, 22 bytes

d.max_by{|i|d.count i}

Basically a port of my Mathematica answer, except Ruby has a direct max_by so I don't need to sort first.

Answer 8

R, 33 25 bytes

Thanks @Hugh for the help shortening:

names(sort(-table(d))[1])

---

The original:

v=table(d);names(v[which.max(v)])

This calculates the frequency of each element in the vector d, then returns the name of the column containing the largest value. The value returned is actually a character string containing the number. It didn't say anywhere that that wasn't okay, so...

Any suggestions to shorten this are welcome!

Answer 9

Powershell 19

($d|group)[0].Count

(this asumes the array is already on $d)

Answer 10

J - 12 char

Anonymous function. Sorts list from most to least common, taking first item.

(0{~.\:#/.~)

• 0{ First of
• ~. Unique items
• \: Downsorted by
• #/.~ Frequencies

Try it for yourself.

Answer 11

JavaScript (ES6) 51

Just a single line expression using the preloaded variable d. Sort the array by frequency then get the first element.
Nasty side effect, the original array is altered

d.sort((a,b)=>d.map(w=>t+=(w==b)-(w==a),t=0)&&t)[0]

As usual, using .map instead of .reduce because it's 1 char shorter overall. With .reduce it' almost a clean, non-golfed solution.

d.sort((a,b)=>d.reduce((t,w)=>t+(w==b)-(w==a),0))[0]

At last, a solution using a function, not changing the original array and without globals (62 bytes):

F=d=>[...d].sort((a,b)=>d.reduce((t,w)=>t+(w==b)-(w==a),0))[0]

Test In FireFox/FireBug console

d=[4,3,1,0,6,1,6,4,4,0,3,1,7,7,3,4,1,1,2,8]
d.sort((a,b)=>x.map(w=>t+=(w==b)-(w==a),t=0)&&t)[0]

Output 1

The d array becomes:

[1, 1, 1, 1, 1, 4, 4, 4, 4, 3, 3, 3, 0, 6, 6, 0, 7, 7, 2, 8]

Answer 12

Python - 32

max((x.count(i),i)for i in x)[1]

Don't see an 18 character solution anywhere in the future to be honest.

EDIT: I stand corrected, and impressed.

Answer 13

05AB1E, 3 bytes

(non-competing - question predates the language)

.MJ

Explanation:

.M  # Gets the most frequent element in the [implicit] input
  J # Converts to a string, needed as the program would output "[1]" instead of "1" without this.

If you want to store the array in a variable instead of using input, just push the array to the stack at the start of the program.

Try it online!

Answer 14

JavaScript, ES6, 71 bytes

A bit long, can be golfed a lot.

f=a=>(c=b=[],a.map(x=>b[x]?b[x]++:b[x]=1),b.map((x,i)=>c[x]=i),c.pop())

This creates a function f which can be called like f([1,1,1,2,1,2,3,4,1,5]) and will return 1.

Try it on your latest Firefox's Console.

Answer 15

C# - 49

Can't really compete using C# but oh well:

Assuming d is the array

d.GroupBy(i=>i).OrderBy(a=>a.Count()).Last().Key;

Answer 16

bash - 29 27 characters

sort|uniq -c|sort -nr|sed q

Using it:

sort|uniq -c|sort -nr|sed q
4
3
1
0
6
1
6
4
4
0
3
1
7
7
3
4
1
1
2
8
[ctrl-D]
5 1

i.e. "1" is the mode, and it appears five times.

Answer 17

GolfScript, 10 bytes

a{a\-,}$0=

From this answer I wrote to Tips for golfing in GolfScript. Expects the input in an array named a, returns result on stack. (To read input from an array on the stack, prepend : for 11 bytes; to read input from stdin (in the format [1 2 1 3 7]), also prepend ~ for 12 bytes.)

This code works by iterating over the input array, subtracting each element from the original array, and counting the number of elements left. This is then used as a key to sort the original array by, and the first element of the sorted array is returned.

Online demo.

Ps. Thanks to Peter Taylor for pointing out this challenge to me.

Answer 18

Perl 6, 21 bytes

.Bag.invert.max.value

Example:

$_ = < 4 3 1 0 6 1 6 4 4 0 3 1 7 7 3 4 1 1 2 8 >».Int;

say .Bag.invert.max.value; # implicitly calls $_.Bag…

If there is a tie it will print the larger of the ones that tied.

---

The .Bag method on a List or an Array creates a quantified hash that associates the total count of how many times a given value was seen with that value.

bag(4(4), 3(3), 1(5), 0(2), 6(2), 7(2), 2, 8)

The .invert method creates a List of the pairs in the bag with the key and the value swapped. ( The reason we call this is for the next method to do what we want )

4 => 4,  3 => 3,  5 => 1,  2 => 0,  2 => 6,  2 => 7,  1 => 2,  1 => 8

The .max method on a List of Pairs returns the biggest Pair comparing the keys first and in the case of a tie comparing the values.
( This is because that is how multi infix:<cmp>(Pair:D \a, Pair:D \b) determines which is larger )

5 => 1

The .value method returns the value from the Pair. ( It would have been the key we were after if it wasn't for the .invert call earlier )

1

---

If you want to return all of the values that tied in the case of a tie:

say @list.Bag.classify(*.value).max.value».key

The .classify method returns a list of pairs where the keys are from calling the Whatever lambda *.value with each of the Pairs.

1 => [2 => 1, 8 => 1],
2 => [0 => 2, 6 => 2, 7 => 2],
3 => [3 => 3],
4 => [4 => 4],
5 => [1 => 5]

Then we call .max to get the largest Pair.

"5" => [1 => 5]

A call to .value gets us the original Pairs from the Bag ( just one in this case )

1 => 5

Then we use >>.key to call the .key method on every Pair in the list, so that we end up with a list of the values that were seen the most.

1

Answer 19

Dyalog APL, 12 characters

d[⊃⍒+/∘.=⍨d]

∘.=⍨d is the same as d∘.=d, reflexive outer product of =. It creates a boolean matrix comparing every pair of elements in d.

+/ sums that matrix along one of the axes and produces a vector.

⍒ grades the vector, i.e. sorts it by indices. (As the glyphs suggest, ⍒ grades in descending order and ⍋ would grade in ascending order.)

⊃ takes the first index from the grading—the index of the largest element of d.

d[...] returns that element.

Answer 20

Haskell, 42 39 bytes

f s=snd$maximum[([1|y<-s,y==x],x)|x<-s]

Try it online!

Edit: Thans to Zgarb for -3 bytes

Answer 21

Brachylog, 5 bytes

ọtᵒth

Try it online!

This isn't really a snippet, but I'm not sure what would be...

         The output is
    h    the first element of
   t     the last element of
ọ        a list of [value, number of occurrences] pairs corresponding to
         the input,
  ᵒ      sorted ascending by
 t       their last elements (the numbers of occurrences).

Answer 22

Clojure, 32 bytes

#(apply max-key(frequencies %)%)

(frequencies %) returns a hash-map, which can be used as a function. Given a key it returns the corresponding value :)

Equal length:

#(last(sort-by(frequencies %)%))

Answer 23

Bash + unix tools, 62 bytes

Expects the array in the STDIN. The input format does not count, as long as the numbers are non-negative integers.

grep -o [0-9]\*|sort|uniq -c|sort -n|awk 'END{print $2}'

Edited: escaped wildcard in grep argument. Now it can be run safely in non-empty directories. Thanks to manatwork.

Answer 24

Java 8 : 184 bytes

Stream.of(A).collect(Collectors.groupingBy(i -> i, Collectors.counting())).entrySet().stream().sorted(Map.Entry.comparingByValue(Comparator.reverseOrder())).findFirst().get().getKey();

Input A must be of type Integer[]. Note java.util.* and java.util.stream.* need to be imported, however in the spirit oneliner they are left out.

Answer 25

Java 8, 83 Bytes

d.stream().max((x,y)->Collections.frequency(d,x)-Collections.frequency(d,y)).get();

d must be a Collection<Integer>.

---

If Collections can be statically imported:
59 Bytes

d.stream().max((x,y)->frequency(d,x)-frequency(d,y)).get();

Answer 26

Haskell 78

import Data.List
import Data.Ord
g=head.maximumBy(comparing length).group.sort

If the imports are ignored, it's 45.

Answer 27

Perl, 27 bytes

$Q[$a{$_}++]=$_ for@F;pop@Q

Returns the last most common value in case of a tie.

Answer 28

PHP, 53 50 bytes

<?=array_flip($c=array_count_values($d))[max($c)];

Run like this:

echo '<?php $d=$argv;?><?=array_flip($c=array_count_values($d))[max($c)]; echo"\n";' | php -- 4 3 1 0 6 1 6 4 4 0 3 1 7 7 3 4 1 1 2 8

Tweaks

• Saved 3 bytes by making use of the freedom to assume the input is assigned to a variable d

Answer 29

Jelly, 7 bytes (non-competing)

ṢŒrṪÞṪṪ

Try it online!

Longer than K :(

Assumes the first argument has the array. There are no variables in Jelly.

Answer 30

Scala, 32

d.groupBy(a=>a).maxBy(_._2.size)

Answer 31

C++ 119

int *a=std::max_element(x,x+n);int z=0,b=0,c=0;for(int i=0;i<=*a;i++){c=std::count(x,x+n,i);if(c>b){b=c;z=i;}}return z;

Full code and test:

#include <iostream>
#include <algorithm>
#include <vector>

int m(int *x,int n)
{
int *a=std::max_element(x,x+n);int z=0,b=0,c=0;for(int i=0;i<=*a;i++){c=std::count(x,x+n,i);if(c>b){b=c;z=i;}}return z;
}

int main()
{
int d[] = {4,3,1,0,6,1,6,4,4,0,3,1,7,7,3,4,1,1,2,8};
std::cout<<m(d,20);
return 0;
}

Answer 32

Ceylon, 67

E m<E>(E+l)=>(l.frequencies().max(increasingItem)else nothing).key;

This function works on any type of element, including Integers (though null elements are ignored). (And it is shorter than the same function for just integers.)

Formatted:

E m<E>(E+ l) =>
        (l
        .frequencies()
        .max(increasingItem)
            else nothing)
    .key;

The else nothing is needed, because the Ceylon compiler can't figure out that l.frequencies always is non-empty if l is nonempty (because in general, all elements of l could be null, and therefore discarded).

You can call this function like this:

print(m(4,3,1,0,6,1,6,4,4,0,3,1,7,7,3,4,1,1,2,8));

If you already have a list list, call it like this:

print(m(*list));

(This will unpack the list into arguments, and pass them to the function.)

Answer 33

Hassium, 94 Bytes

This example assumes that the array is stored in d

func main(){t,b=0;foreach(e in d){c=0;foreach(n in d)if(e==n)c++;if(c>b){b=c;t=e;}}println(t)}

See expanded and run online with test case here

Answer 34

Pyke, 10 bytes

(non-competing), language newer than challenge

D3m/DSe@R@

Try it here!

Answer 35

jq, 29 characters

group_by(.)|max_by(length)[0]

Sample run:

bash-4.3$ jq 'group_by(.)|max_by(length)[0]' <<< '[4,3,1,0,6,1,6,4,4,0,3,1,7,7,3,4,1,1,2,8]'
1

On-line test