< Xorg

Xorg/Keyboard configuration

This article describes the basics of Xorg keyboard configuration. For advanced topics such as keyboard layout modification or additional key mappings, see X keyboard extension or Extra keyboard keys respectively.

Related articles

The Xorg server uses the X keyboard extension (XKB) to define keyboard layouts. Optionally, xmodmap can be used to access the internal keymap table directly, although this is not recommended for complex tasks. Also systemd's localectl can be used to define the keyboard layout for both the Xorg server and the virtual console.

Note: XKB options can be overridden by the tools provided by some desktop environments such as GNOME and KDE.

Viewing keyboard settings

You can use the following command to see the actual XKB settings:

$ setxkbmap -print -verbose 10
Setting verbose level to 10
locale is C
Applied rules from evdev:
model:      evdev
layout:     us
options:    terminate:ctrl_alt_bksp
Trying to build keymap using the following components:
keycodes:   evdev+aliases(qwerty)
types:      complete
compat:     complete
symbols:    pc+us+inet(evdev)+terminate(ctrl_alt_bksp)
geometry:   pc(pc104)
xkb_keymap {
        xkb_keycodes  { include "evdev+aliases(qwerty)" };
        xkb_types     { include "complete"      };
        xkb_compat    { include "complete"      };
        xkb_symbols   { include "pc+us+inet(evdev)+terminate(ctrl_alt_bksp)"    };
        xkb_geometry  { include "pc(pc104)"     };
};

Third party utilities

There are some "unofficial" utilities which allow to print specific information about the currently used keyboard layout.

$ xkb-switch
us
  • :

Setting keyboard layout

Keyboard layout in Xorg can be set in multiple ways. Here is an explanation of used options:

  • selects the keyboard model. This has an influence only for some extra keys your keyboard might have. The safe fallback are or pc105. But for instance laptops usually have some extra keys, and sometimes you can make them work by simply setting a proper model.
  • XkbLayout selects the keyboard layout. Multiple layouts may be specified in a comma-separated list, e.g. if you want to quickly switch between layouts.
  • selects a specific layout variant available for the XkbLayout. For instance, the default (Slovak) variant is , but you can manually specify , etc.
  • contains some extra options (comma-separated). Used for specifying layout switching, notification LED, compose mode etc. See the #Frequently used XKB options section for examples.

The layout name is usually a 2-letter country code. To see a full list of keyboard models, layouts, variants and options, along with a short description, open . Alternatively, you may use one of the following commands to see a list without a description:

  • localectl list-x11-keymap-variants [layout]
  • localectl list-x11-keymap-options

Examples in the following subsections will have the same effect, they will set model, as primary layout, as secondary layout, variant for layout and the combination for switching between layouts. See for more detailed information.

Using setxkbmap

setxkbmap sets the keyboard layout for the current X session only, but can be made persistent in xinitrc or xprofile. This overrides system-wide configuration specified following #Using X configuration files. However, persistence does not apply to keyboards such as external keyboards, unless their device id was specified when setxkbmap was run. Or that they are the core keyboard device of the X server.

The usage is as follows (see ):

$ setxkbmap [-model xkb_model] [-layout xkb_layout] [-variant xkb_variant] [-option xkb_options]
Note: setxkbmap adds options specified in the command line to the options that were set before (as saved in root window properties). If you want to replace all previously specified options, use the -option flag with an empty argument first.

To change just the layout (-layout is the default flag):

$ setxkbmap xkb_layout

For multiple customizations:

$ setxkbmap -model pc104 -layout cz,us -variant ,dvorak -option grp:win_space_toggle

Using X configuration files

The syntax of X configuration files is explained in Xorg#Configuration. This method creates system-wide configuration which is persistent across reboots.

Here is an example:

Using localectl

For convenience, the tool localectl may be used instead of manually editing X configuration files. It will save the configuration in , this file should not be manually edited, because localectl will overwrite the changes on next start.

The usage is as follows:

# localectl [--no-convert] set-x11-keymap layout [model [variant [options]]]

To set a model, variant or options, all preceding fields need to be specified, but the preceding fields can be skipped by passing an empty string with . Unless the option is passed, the specified keymap is also converted to the closest matching console keymap and applied to the console configuration in . See for more information.

To create a like the above:

# localectl --no-convert set-x11-keymap cz,us pc104 ,dvorak grp:win_space_toggle

Frequently used XKB options

Switching between keyboard layouts

To be able to easily switch keyboard layouts, first specify multiple layouts between which you want to switch (the first one is the default). Then specify a key (or key combination), which will be used for switching. For example, to switch between a US and a Swedish layout using the key, use us,se as an argument of XkbLayout and as an argument of . The number of XkbLayouts should match that of the s — if you want to switch solely between different variants, then duplicate the layout accordingly (e.g. ).

The list of available layouts (and variants) can be found in xkeyboard-config(7) § LAYOUTS. The key combinations available for layout switching are listed in .

Note that the option is unreliable and unlikely to be fixed; prefer other combinations.

Switch languages using Alt Shift

To set as a layout shortcut, use in .

However, there is a known issue with XKB that causes other shortcuts of the type to break. Moreover, XKB may set the right to be AltGr by default in some keyboard layouts, making not working for layout switching.

As a workaround, sxhkd may be used to switch layouts by adding the following to : 

Shift_L + Alt_L
    setxkbmap -query | grep -q 'fr' && setxkbmap us || setxkbmap fr,us
Shift_R + Alt_R
    setxkbmap -query | grep -q 'fr' && setxkbmap us || setxkbmap fr,us

Note that for some reason, must be pressed before to be detected by sxhkd.

Terminating Xorg with Ctrl+Alt+Backspace

By default, the key combination is disabled. You can enable it by passing terminate:ctrl_alt_bksp to . This can also be done by binding a key to in (which undoes any existing setting). In order for either method to work, one also needs to have set to "off" in : since 2004 this is the default.

Swapping Caps Lock with Left Control

To swap Caps Lock with Left Control key, add to . Run the following command to see similar options along with their descriptions:

$ grep -E "(ctrl|caps):" /usr/share/X11/xkb/rules/base.lst

Enabling mouse keys

Mouse keys, not to be confused with the keys of the mouse, is disabled by default and has to be manually enabled by passing keypad:pointerkeys to . This will make the shortcut toggle mouse keys.

See also X keyboard extension#Mouse control for advanced configuration.

Configuring compose key

Though typically not on traditional keyboards, a Compose key can be configured to an existent key.

The key begins a keypress sequence that involves (usually two) additional keypresses. Usage is typically either for entering characters in a language that the keyboard was not designed for, or for other less-used characters that are not covered with the AltGr modifier. For example, pressing produces , or will produce an "em dash": .

Though a few more eccentric keyboards feature a key, its availability is usually through substituting an already existing key to it. For example, to make the Menu key a key use the Desktop environment configuration, or pass to (or setxkbmap: ). Allowed key substitutions are defined in :

$ grep "compose:" /usr/share/X11/xkb/rules/base.lst

If the desired mapping is not found in that file, an alternative is to use xmodmap to map the desired key to the Multi_key keysym, which acts as a compose key by default (note that xmodmap settings are reset by setxkbmap).

Key combinations

The default combinations for the compose keys depend on the locale configured for the session and are stored in , where is for example .

You can define your own compose key combinations by copying the default file to and editing it. Alternatively, create an empty and include the default one using , for example:

The compose key (denoted as in the file) works with any of the thousands of valid Unicode characters, including those outside the Basic Multilingual Plane. Take a look at the Compose(5) man page, it explains the format of the XCompose files.

However, GTK does not use XIM by default and therefore does not follow keys. This can be fixed by forcing GTK to use XIM by adding and/or export XMODIFIERS="@im=none" to .

Currency sign on other key

Most European keyboards have a Euro sign (€) printed on on the key. For example, to access it with , use the and options.

The Rupee sign (₹) can be used the same way with rupeesign:4.

Switching state immediately when Caps Lock is pressed

Those who prefer typing capital letters with the Caps Lock key may experience a short delay when Caps Lock state is switched, resulting in two or more capital letters (e.g. THe, ARch LInux). This occurs because Caps Lock is enabled immediately once the Caps Lock key is pressed, but is only disabled upon release of the second key-press. This behaviour stems from typewriters where a Caps Lock function was achieved by physically locking the shifted typebars in place, and the release of a shift key-press was the action that caused the release of the lock.

Some more popular operating systems have removed this behaviour, either voluntarily (as it can be confusing to some) or by mistake, however this is a question of preference. Bug reports have been filed on the Xserver bug tracker, as there is currently no easy way to switch to the behaviour reflected by those other operating systems. For anyone who would like to follow up the issue, bug reports and latest working progress can be found at and .

Workaround

First, export your keyboard configurations to a file:

$ xkbcomp -xkb $DISPLAY xkbmap

In the file xkbmap, locate the Caps Lock section which begins with key <CAPS>:

 key <CAPS> {         [       Caps_Lock ] };

and replace whole section with the following code:

key <CAPS> {
    repeat=no,
    type[group1]="ALPHABETIC",
    symbols[group1]=[ Caps_Lock, Caps_Lock],
    actions[group1]=[ LockMods(modifiers=Lock), Private(type=3,data[0]=1,data[1]=3,data[2]=3)]
};

Save and reload keyboard configurations:

$ xkbcomp -w 0 xkbmap $DISPLAY

Consider making it a service launching after X starts, since reloaded configurations do not survive a system reboot.

One-click key functions

To assign an additional one-click function to a modifier key, you can use . For example it is possible to have work as when pressed alone, and as Control when used with another key. First set the Control swapping using setxkbmap as mentioned earlier, and xcape to set the association:

 $ xcape -e 'Caps_Lock=Escape'

You can set multiple associations separated with a semicolon, e.g.: .

If you hold a key for longer than the timeout value (default 500 ms), xcape will not generate a key event.

Adjusting typematic delay and rate

The typematic delay indicates the amount of time (typically in milliseconds) a key needs to be pressed and held in order for the repeating process to begin. After the repeating process has been triggered, the character will be repeated with a certain frequency (usually given in Hz) specified by the typematic rate. Note that these settings are configured separately for Xorg and for the virtual console.

Using xset

The tool xset can be used to set the typematic delay and rate for an active X server, certain actions during runtime though may cause the X server to reset these changes and revert instead to its seat defaults.

Usage:

$ xset r rate delay [rate]

For example to set a typematic delay to 200ms and a typematic rate to 30Hz, use the following command (use xinitrc to make it permanent):

$ xset r rate 200 30

Issuing the command without specifying the delay and rate will reset the typematic values to their respective defaults; a delay of 660ms and a rate of 25Hz:

$ xset r rate

Using AutoRepeat configuration option

To persist the configuration and change the seat defaults, you can create an Xorg configuration file as described in #Using X configuration files, and add a section entry:

Using XServer startup options

Another method of persisting the configuration is to pass the desired settings to the X server on its startup using the following options:

  • - sets the autorepeat delay (length of time in milliseconds that a key must be depressed before autorepeat starts).
  • - sets the autorepeat interval (length of time in milliseconds that should elapse between autorepeat-generated keystrokes).

See for a full list of X server options and refer to your display manager for information about how to pass these options.

gollark: What yes?
gollark: Yes?
gollark: And yet you don't.
gollark: I wouldn't mind *much* if you just... privately warned people, and stopped looking if they asked you to.
gollark: gnu-nobody is declared Class-4 Extreme Bees.

See also
This article is issued from Archlinux. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.