Device file

On Linux they are in the /dev directory, according to the Filesystem Hierarchy Standard.

Related articles

From Wikipedia:

In Unix-like operating systems, a device file or special file is an interface to a device driver that appears in a file system as if it were an ordinary file.

On Arch Linux the device nodes are managed by udev.

Block devices

A block device is a special file that provides buffered access to a hardware device. For a detailed description and comparison of virtual file system devices, see Wikipedia:Device file#Block devices.

Block device names

The beginning of the device name specifies the kernel's used driver subsystem to operate the block device.

Warning: Kernel name descriptors for block devices are not persistent and can change each boot, they should not be used in configuration files.

SCSI

Storage devices, like hard disks, SSDs and flash drives, that support the SCSI command (SCSI, SAS, UASP), ATA (PATA, SATA) or USB mass storage connection are handled by the kernel's SCSI driver subsystem. They all share the same naming scheme.

The name of these devices starts with sd. It is then followed by a lower-case letter starting from a for the first discovered device (sda), b for the second discovered device (sdb), and so on.

Examples:

  • - device a, the first discovered device.
  • - device , the fifth discovered device.

NVMe

The name of storage devices, like SSDs, that are attached via NVM Express (NVMe) starts with . It is then followed by a number starting from 0 for the device controller, nvme0 for the first discovered NVMe controller, for the second, and so on. Next is the letter "n" and a number starting from expressing the device on a controller, i.e. for first discovered device on first discovered controller, for second discovered device on first discovered controller, and so on.

Examples:

  • - device on controller 0, the first discovered device on the first discovered controller.
  • - device on controller , the fifth discovered device on the third discovered controller.

MMC

SD cards, MMC cards and eMMC storage devices are handled by the kernel's mmc driver and name of those devices start with . It is then followed by a number starting from 0 for the device, i.e. for first discovered device, for second discovered device and so on.

Examples:

  • - device 0, the first discovered device.
  • - device , the fifth discovered device.

SCSI optical disc drive

The name of optical disc drives (ODDs), that are attached using one of the interfaces supported by the SCSI driver subsystem, start with . The name is then followed by a number starting from 0 for the device, ie. for the first discovered device, for the second discovered device, and so on.

Udev also provides /dev/cdrom that is a symbolic link to . The name will always be regardless of the drive's supported disc types or the inserted media.

Examples:

  • - optical disc drive 0, the first discovered optical disc drive.
  • /dev/sr4 - optical disc drive , the fifth discovered optical disc drive.
  • /dev/cdrom - a symbolic link to .

virtio-blk

The name of drives attached to a virtio block device (virtio-blk) interface start with . It is then followed by a lower-case letter starting from a for the first discovered device (), b for the second discovered device (), and so on.

Examples:

  • - device a, the first discovered device.
  • - device , the fifth discovered device.

Partition

Partition device names are a combination of the drive's device name and the partition number assigned to them in the partition table, i.e. /dev/drivepartition. For drives whose device name ends with a number, the drive name and partition number is separated with the letter "p", i.e. .

Examples:

  • - partition on .
  • - partition 3 on .
  • - partition on .
  • - partition on .
  • - partition on .

lsblk

The package provides the lsblk(8) utility which lists block devices, for example:

In the example above, only one device is available (sda), and that device has three partitions ( to ), each with a different file system.

wipefs

wipefs can list or erase file system, RAID or partition-table signatures (magic strings) from the specified device to make the signatures invisible for . It does not erase the file systems themselves nor any other data from the device.

See for more information.

For example, to erase all signatures from the device and create a signature backup ~/wipefs-sdb-offset.bak file for each signature:

# wipefs --all --backup /dev/sdb

Pseudo-devices

Device nodes that do not have a physical device.

gollark: ↑
gollark: ... ARing but not autoclicking is bad and yet just having a keyboard which lets you hit F5 fast is fine?
gollark: Surely TJ09'd complain about that automatic data gathering though.
gollark: Interesting how high the variation between each of the three slots is.
gollark: Probably accidentally got a - sign stuck on somewhere but TJ09 won't admit it.

See also
This article is issued from Archlinux. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.